MPPT Solar Charger Testing

Wed, 28 Sep 2016 00:00:00 +0000

In a previous post I have presented a design for an MPPT Solar Charger. In the mean time I have built a prototype and also wrote some software for it. So today I’ll go through my findings of what works well and what needs to be improved. And yes, there are some flaws in the design…

USB Boost Converter

Tue, 04 Aug 2015 00:00:00 +0000

Finished 5V to 12V USB boost converter

I frequently need a low-power supply to run a microcontroller system. Typically, one uses a lab power for such purposes. But at least on the desk where I do the programming I don’t have one. Since these systems typically consume little current it would be handy to be able to power them from USB. Most of my devices have on-board regulators so the voltage is rather uncritical. For 3.3 volt devices, the 5V from USB is just right. But others have a 5V regulator so they need a higher supply voltage. And even others might even need 12 volts.

switch-mode-power-supply on soldernerd

MPPT Solar Charger Testing

USB Boost Converter